Dimension
|
|
Weight
|
Up to 16.0 kg (35.3 lb)
|
Processor (depending on the model)
|
For a list of supported processors, see: Lenovo ServerProven website
Note
-
All processors on the system board must be of the same type, and have the same speed, number of cores, and frequency.
|
Memory
|
For 1st Generation Intel Xeon Scalable Processors (Intel Xeon SP Gen 1):
For 2nd Generation Intel Xeon Scalable Processors (Intel Xeon SP Gen 2):
Note
List of supported memory module is different for 1st generation (Skylake) and 2nd generation (Cascade Lake) Intel Xeon processors. Make sure to install compatible memory modules to avoid system error.For a list of supported DIMMs, see: Lenovo ServerProven website.
Note
-
Operating speed and total memory capacity depends on the processor model and UEFI settings.
-
When four DCPMMs are installed, ensure that the processor TDP is lower than or equal to 125 watts.
|
Operating systems |
Supported and certified operating systems:
For a complete list of operating systems, see:
OS Interoperability Guide
For OS deployment instructions, see: Deploy the operating system.
|
Internal drives
|
-
Up to four 3.5-inch hot-swap SAS/SATA drives
-
Up to four 3.5-inch simple-swap SATA drives
-
Up to eight 2.5-inch hot-swap SAS/SATA drives
-
Up to ten 2.5-inch hot-swap SAS/SATA/NVMe drives (NVMe drives are supported only in drive bays 6–9)
-
Up to two M.2 drives
|
PCIe slots
|
Depending on the model, your server supports up to three PCIe slots in the rear. For more information, see Rear view.
|
Input/Output (I/O) features
|
-
-
Rear panel:
-
One VGA connector
-
Two USB 3.0 connectors
-
Two 1 Gb Ethernet connectors (RJ-45)
-
One XClarity Controller network connector
-
Two Ethernet connectors on the LOM adapter (available on some models)
-
One serial port (available on some models)
|
RAID/HBA adapters (depending on the model)
|
-
SAS/SATA HBA adapters
-
ThinkSystem 430-8i SAS/SATA 12Gb HBA
-
ThinkSystem 430-16i SAS/SATA 12Gb HBA
-
ThinkSystem 430-8e SAS/SATA 12Gb HBA
-
ThinkSystem 430-16e SAS/SATA 12Gb HBA
-
ThinkSystem 440-8i SAS/SATA PCIe Gen4 12Gb HBA
-
ThinkSystem 440-16i SAS/SATA PCIe Gen4 12Gb HBA
-
ThinkSystem 440-16e SAS/SATA PCIe Gen4 12Gb HBA
-
SAS/SATA RAID adapters
-
ThinkSystem RAID 530-8i PCIe 12Gb Adapter
-
ThinkSystem RAID 530-16i PCIe 12Gb Adapter
-
ThinkSystem RAID 540-8i PCIe 12Gb Adapter
-
ThinkSystem RAID 540-16i PCIe Gen4 12Gb Adapter
-
ThinkSystem RAID 730-8i 1GB Adapter
-
ThinkSystem RAID 730-8i 2GB PCIe Adapter
-
ThinkSystem RAID 930-8i 2GB Flash PCIe 12Gb Adapter
-
ThinkSystem RAID 930-16i 4GB Flash PCIe 12Gb Adapter
-
ThinkSystem RAID 930-16i 8GB Flash PCIe 12Gb Adapter
-
ThinkSystem RAID 930-8e 4GB Flash PCIe 12Gb Adapter
-
ThinkSystem RAID 940-8e 4GB Flash PCIe 12Gb Adapter
-
ThinkSystem RAID 940-8i 4GB Flash PCIe Gen4 12Gb Adapter
-
ThinkSystem RAID 940-16i 4GB Flash PCIe Gen4 12Gb Adapter
-
ThinkSystem RAID 940-16i 8GB Flash PCIe Gen4 12Gb Adapter
-
ThinkSystem RAID 5350-8i PCIe 12Gb Adapter
-
ThinkSystem RAID 9350-8i 2GB Flash PCIe 12Gb Adapter
Note
-
A software RAID controller is integrated on the system board. The software RAID controller supports JBOD mode and RAID levels 0, 1, 5, and 10.
-
RAID 730-8i 1G Cache SAS/SATA adapter is not available for North America.
-
If RAID 730-8i 1GB/2GB Cache SAS/SATA adapter is installed, ThinkSystem 2.5″ PM1653/PM1655 Read Intensive/Mixed Use SAS 24Gb SSD cannot be installed.
-
RAID 530-8i SAS/SATA adapter cannot be mixed with RAID 730-8i 1G Cache SAS/SATA adapter.
-
RAID 730-8i 2G Flash SAS/SATA adapter cannot be mixed with RAID 730-8i 1G Cache SAS/SATA adapter or RAID 930- 8i SAS/SATA adapter.
-
The RAID 940 adapters can be mixed with the ThinkSystem 440-8i SAS/SATA PCIe Gen4 12Gb HBA and the ThinkSystem 440-16i SAS/SATA PCIe Gen4 12Gb HBA.
-
Mixing of RAID/HBA 430/530/730/930 adapters (Gen 3) and RAID/HBA 440/540/940 adapters (Gen 4) in the same system is not allowed.
-
RAID 930/940 series or 9350 series adapters require a RAID flash power module.
-
RAID 5350/9350 series adapters cannot be mixed with HBA/RAID 430/440/530/540/730/930/940 series SAS/SATA adapters.
|
System fans
|
|
Power supplies
|
One or two hot-swap power supplies for redundancy support
-
550-watt ac 80 PLUS Platinum
-
750-watt ac 80 PLUS Platinum
-
750-watt ac 80 PLUS Titanium
Note
-
For server models with four 3.5-inch simple-swap drive bays and 550-watt power supplies, if you want to install two processors, ensure that the processor Thermal Design Power (TDP) is less than or equal to 125 watts.
-
For server models with eight 2.5-inch hot-swap drive bays and 550-watt power supplies, if you want to install two processors, ensure that the processor TDP is less than or equal to 105 watts.
|
Reviews
There are no reviews yet.